What your AED’s status light means

Every AED tests itself while it waits and shows the result on a small readiness indicator. Here is where it is on each model and what it should show, so you can tell ready from not ready at a glance.

By the Think Health team, AED suppliers · Updated

Four rules for any AED

  • It’s not the On/Off button. On Philips units the big green On/Off button is easy to mistake for the small Ready light.
  • Watch for 10 seconds. Some lights blink only every five seconds or so. A glance can miss it.
  • Red means attention. A red light, a red ✗, chirping or beeping all mean the AED may not work.
  • No light means not ready. Treat a blank window or a light that never blinks as a fault.

The readiness light, model by model

AEDWhere to lookReadyNot ready
Philips HeartStart FRxThe small green Ready light, not the green On/Off buttonIt blinks green every few seconds. There can be a gap of a few seconds between blinks, so watch for a full 10 seconds before deciding.No blink in 10 seconds, or the AED chirping, means it needs attention.
Philips HeartStart HS1The small green Ready light at the top right, not the green On/Off buttonIt blinks green every few seconds. Watch it for a full 10 seconds before deciding.No blink in 10 seconds, or the AED chirping, means it needs attention.
ZOLL AED PlusThe status window on the left of the handleA green ✓ (tick) in the window.A red ✗ means it is not ready: it failed a self-test, often because the batteries are low. It may also beep.
ZOLL AED 3The small status window just right of the On/Off buttonA green ✓ (tick) in the window.If the green ✓ isn’t showing, it needs attention.
Powerheart G3The round Rescue Ready light beside the handle, with the lid closedGreen.Red means it needs attention. The AED may also beep.
Powerheart G5The round Rescue Ready light beside the handle, with the lid closedGreen.Red means it needs attention. The AED may also beep.
Defibtech LifelineThe small light at the top-right corner, by the handleIt flashes green about every 5 seconds. Watch for 10 seconds to see two flashes.Red, or no green flash in 10 seconds, means it needs attention.
Defibtech Lifeline AUTOThe small light at the top-right corner, by the handleIt flashes green about every 5 seconds. Watch for 10 seconds to see two flashes.Red, or no green flash in 10 seconds, means it needs attention.
Defibtech Lifeline VIEWThe small light just right of the On/Off buttonIt flashes green. Watch for 10 seconds.Red, or no green flash in 10 seconds, means it needs attention.
Defibtech Lifeline ECGThe small light just right of the On/Off buttonIt flashes green. Watch for 10 seconds.Red, or no green flash in 10 seconds, means it needs attention.

Philips HeartStart: the blinking Ready light

The FRx and HS1 have a small green Ready light that blinks every few seconds when the AED is ready. If it stops blinking, the AED usually chirps too. That chirp is the AED asking for attention, often for its battery.

ZOLL: the green tick

The AED Plus and AED 3 show a steady green ✓ in a small status window. On the AED Plus a red ✗ means it failed a self-test, often because its ten batteries are low.

Powerheart: the Rescue Ready light

The G3 and G5 have a round Rescue Ready light by the handle: green for ready, red for attention. Touching or opening the lid can turn it red for about five seconds, so look again after a moment before deciding it has failed.

Defibtech Lifeline: the flashing light

Every Lifeline model flashes a small green light when ready: by the handle on the Lifeline and AUTO, and just right of the On/Off button on the VIEW and ECG. Red means it needs attention.

“Ready” isn’t the whole check

A green light means the AED passed its own self-test. It doesn’t tell you the spare pads are in date, the rescue kit is there or the cabinet can be opened. Run the full AED inspection checklist once a month.

Not sure what you’re seeing? The free app films the light for you and tells you whether it shows ready. Where a light blinks, it counts the blinks.

Common questions

What does a blinking green light on an AED mean?

On AEDs with a blinking Ready light (Philips HeartStart and Defibtech Lifeline models), blinking green means the AED passed its last self-test and is ready to use.

What does a red light or a red X on an AED mean?

The AED needs attention and may not work. Check that the battery is fitted and in date and the pads are plugged in and in date. If it stays red, contact your supplier and tell people where the nearest working AED is.

My AED’s light is off. Is it ready?

Treat it as not ready. On models whose light blinks, watch for a full 10 seconds first: some only flash every five seconds or so.

Why is my AED beeping or chirping?

A chirp or beep on standby is the AED asking for attention, usually because of a low battery, a pads problem or a failed self-test. Check the readiness light, the battery and the pads.