Philips · inspection guide

How to inspect a Philips HeartStart HS1

The monthly check, step by step: the readiness light, the pads and battery dates, and the serial number that tells you how old it is. Sold in the US as the HeartStart OnSite.

By the Think Health team, AED suppliers · Updated

Philips HeartStart HS1 AED

The HS1 check in six steps

  1. Readiness light: it blinks green every few seconds.
  2. Serial number: readable, and tells you how old the unit is.
  3. Pads expiry: the date has not passed.
  4. Battery date: the date has not passed.
  5. Battery fitted: pushed fully in and flush.
  6. Pads connected: the cartridge fitted, PULL handle down.

Is this your AED?

Deeper blue and upright, with a carry strap. The pads cartridge slides into the front. The model name is printed on the front of the unit and on the label at the back.

1. Is it ready? Check the readiness light

Every AED tests itself and shows the result on a readiness indicator. On the HS1 it is the small green Ready light at the top right, not the green On/Off button.

  • Ready: It blinks green every few seconds. Watch it for a full 10 seconds before deciding.
  • Not ready: No blink in 10 seconds, or the AED chirping, means it needs attention.

See what the light means on other models in our status light guide.

2. Find the serial number

The small “SN” label at the bottom of the back panel.

How old is your HS1?

Philips puts the year and month in the serial number: after the first letter come two digits for the year, then a letter for the month (A is January, L is December). “A18A-06336” was made in January 2018.

Age matters: many AED owners plan to replace a unit at around ten years, and an older unit may no longer be supported by its maker. More in how old is my AED.

3. Check the pads expiry date

On the pads cartridge, just below the body diagram, beside the ⌛ symbol.

Replace the pads cartridge if the date has passed, after any use (they are single-use), or if the package is open or damaged. Expired pads can dry out and may not stick or conduct properly. More in AED pads expiry.

4. Check the battery date

On the blue battery at the back: the install-before date.

That date is for a spare still in its packaging: don’t fit one that is past it. A fitted battery is watched by the AED’s self-tests.

More in AED battery expiry.

5. Make sure the battery is fitted

The blue battery should sit fully in and flush with the back of the AED.

6. Make sure the pads are connected

The pads cartridge should be fitted in the front, with its green PULL handle down.

Child pads or key

Infant/child pads come as a separate cartridge, marked with a teddy-bear icon. Keep a spare if children could be present.

The cabinet, rescue kit and emergency sign

  • Cabinet or case: easy to reach, not locked or blocked, and the alarm working if it has one.
  • Rescue kit: gloves, a razor, scissors and a CPR face mask, sealed and with the AED.
  • Emergency contacts sticker: on the AED or its cabinet, with your local emergency number.

If something fails

Many faults take seconds to fix: push the battery fully home, plug the pads back in, close the lid, then check the readiness light again. An expired battery or pads can’t be fixed on the spot and need replacing. The free inspection’s report lists exactly what failed, and you can ask for a quote for the right pads or battery for your HS1 from the result screen.

Philips HeartStart HS1: common questions

Is the Philips HS1 the same as the HeartStart OnSite?

Yes. Philips sells the same AED as the HeartStart OnSite in the US and the HeartStart HS1 elsewhere. The checks are identical.

Why is my Philips HS1 chirping?

A chirp means the AED needs attention, usually a low battery, a missing pads cartridge, or a failed self-test. Check the Ready light, the battery and the pads cartridge, and contact your supplier if it keeps chirping.

Where is the expiry date on HS1 pads?

On the pads cartridge itself, just below the body diagram, next to the ⌛ symbol.

Other AED models

All AED models